Use this to modify your Ground Glass Mount on a Chroma Six:17 to be attached to the camera.
Youl will need to print one of each part, and two of the Hinge Mounts (one for either side of the Ground Glass)
In addition you will need some VHB Tape to aattach the Hinge Mounts to the Ground Glass (Removable)
You will also need:
2 x M3 inserts for the Hinge Mounts
2 x M3 rivnuts for the Base mounts
2 x M3 screws to attach the screen to the hinges (i add a small amount of locktite to them to keep them in place
2 x M3 screws to attach the hinges to the base
4 x selft tapping screws to attach the Arca Swiss plate to the bases
2 x Magnets glued into the screen protector and a small strip of adhesive magnet to attach to the top of the ground glass
Use this to modify your Ground Glass Mount on a Chroma Six:17 to be attached to the camera.
Youl will need to print one of each part, and two of the Hinge Mounts (one for either side of the Ground Glass)
In addition you will need some VHB Tape to aattach the Hinge Mounts to the Ground Glass (Removable)
You will also need:
2 x M3 inserts for the Hinge Mounts
2 x M3 rivnuts for the Base mounts
2 x M3 screws to attach the screen to the hinges (i add a small amount of locktite to them to keep them in place
2 x M3 screws to attach the hinges to the base
4 x selft tapping screws to attach the Arca Swiss plate to the bases
2 x Magnets glued into the screen protector and a small strip of adhesive magnet to attach to the top of the ground glass
